Storage · Intermediate · 4–8 hours
Entryway Shoe Rack
An open shoe rack concept with two storage levels and a compact footprint.
32 × 13 × 18 inPlanning reference
Planning reference: verify all dimensions, loads, fasteners, joinery and tool procedures for your actual materials and application before building.
Why build it
A shoe rack is a practical way to practice repeated parts, shelf spacing, squareness and basic joinery while building something used every day.
Materials
- 3/4 in plywood or furniture boards
- Wood screws or dowels
- Wood glue
- Feet or floor protectors
- Finish
Starter cut list
| Part | Qty | Length | Width |
|---|---|---|---|
| Top | 1 | 32 in | 13 in |
| Side panel | 2 | 18 in | 13 in |
| Lower shelf | 1 | 30.5 in | 12 in |
| Back stretcher | 1 | 30.5 in | 3 in |
Build sequence
- Measure the target entryway and largest footwear before finalizing depth and shelf spacing.
- Cut matching side panels together where possible.
- Mark shelf references from a single baseline to reduce cumulative error.
- Dry-fit, check diagonals for square, then assemble.
- Finish and add floor protection before use.
Variations
| Variation | Width | Depth | Note |
|---|---|---|---|
| Narrow | 24 in | 12 in | Reduced width for apartments and tight hallways. |
| Bench-height | 36 in | 14 in | Wider top surface; evaluate structure before using as seating. |
| Tall rack | 28 in | 12 in | Adds another shelf level while preserving floor space. |